How I've been sharpening for web lately

I've seen much discussion recently about sharpening methods for web, so I thought I'd throw in my two cents.  As always, my intention is to help you understand the process, not just follow steps by rote, or rely on actions.

I must say my web sharpening method (and taste) have evolved a bit over the last few years, but I'm happy with where I'm at now.

I usually use Unsharp Mask, and that's what I'll be discussing here.  To get the best value out of this post, I strongly recommend you read my thorough explanation of USM here, and my overview of web image practices here, if you haven't already.

So, I edit my image, I save the master file, blah blah blah.  Then, when I'm ready to prepare a web-size proof, I flatten the layers, then resize to the appropriate pixel dimensions.  Remember, your sharpening will be for naught if you don't get the size exactly right beforehand.  To resize I use either the Crop Tool, the Image Size dialog, or Fit Image, depending on the circumstances.  I use plain ol' Bicubic method for interpolation, but that's because I'm lazy!  You should experiment with the Bicubic Sharper method to see if you like it better.

Some more recent editing jobs

I've been kept very busy with small editing jobs lately.  Here are a few more.

(Thanks to Amy S, Casey Y, Iris H, Jen B, Kelly H, Traci N and Catherine R for their permission to post these.)


(Most of the files were supplied in raw format, and of course it's impossible to show a "SOOC" raw file.  So in the case of raws, the "before" shots are rendered using ACR's defaults.)

1. Pesky shiny velvety material:

2. General skin correction:

3. Cup removal and glare removal:

4. Glasses glare removal:

5. General lightening and colour correction:

 6. General skin correction:

7. Eye work and general skin correction:

SO proud of this one!

Quite a few people have sent images to me for editing recently, and kept me quite busy. I appreciate your support.

The lovely Heidi Hjelm sent me this beautiful photo (which I've cropped a little here), with one problem - the same problem that bugs a lot of little girls, I guess ... her brother!

Well, I rocked my own socks with this one!  Now you see him, now you don't!

It may not seem like much, but if you've ever tried to work with hair, you'll know it's very difficult.  You might be surprised to know there wasn't much cloning involved - it was mostly Hue/Saturation and Levels adjustments, and masking of course.

Shift while brushing

I have been surprised to discover that not everybody knows about the Shift key.

Lol!  Obviously everyone knows about the Shift key.  What I mean is, not everyone uses it in conjunction with their Brush Tool, particularly while masking.

The principle is perfectly simple - try it yourself and see.  Take your brush tool, and click once to paint a dot somewhere on your image.  Then hold down the Shift key and click somewhere else.  The Brush Tool will automatically draw a straight line between one point and the other.

Now, I guess you mightn't have to paint straight lines all that often, but gradual curved lines are a fairly frequent matter, at least for me.  For example, if I'm masking around someone's body, the Shift key is my best friend.  Rather than trying to paint the mask freehand, I can do it much faster and easier with a series of Shift-clicks around the subject.

There were only three or four clicks in the above line, whilst holding down the Shift key.  In this way, I can mask around an entire person in lightning-fast time.  Once I've done the outline, I can easily fill in the rest of the mask with the Paint Bucket tool.

Tips for photographing old photos for restoration

The following post is by my beautiful wife, Lara:

Every now and again, Damien is given old, fragile photographs to be painstakingly restored.

Generally he scans them (sometimes in a few different pieces) but sometimes they're too big for the scanner, or are too fragile to be scanned.  In those instances he needs me to photograph them for him instead, and he asked me to share some tips on how to do this.

The role of masks when cloning

Some things are easy to clone; some things are really hard. It all depends on the photo. Cloning a speck of dust from a blue sky is a piece of cake, but the same speck on somebody's face can be a nightmare.

In this post I want to discuss cloning something out from behind something else. When an undesirable object directly intersects behind your subject, it takes some careful work to ensure a realistic result. BUT ... most people assume that the careful work has to be performed with the Clone Tool itself. Not so.

The secret - if laziness can be called a "secret" - is to be really loose and rough with your cloning. The careful part comes with the subsequent masking.

Oh no! Windows 7

I just bought a new laptop, and it has Windows 7 on it.  I know I'm a bit behind the times, but I always catch up eventually ;)

My old laptop had Vista on it, and I was always cursed by the well-documented monitor profile problem; namely, Vista would lose my monitor calibration every time the computer slept, or hibernated, or whatever.  Strangely, not all Vista users had this issue, but many of us certainly did, and it irritated us that Microsoft never fixed it.

Thankfully, X-Rite (manufacturers of the i1 range of calibrators) made a free program called "Display Profile" to circumvent the problem.  I wrote about it in this article.

I'd heard that the shortcoming had been fixed in Windows 7, and I was very happy about that.  So, needless to say I was rather annoyed when my new laptop lost its monitor profile after its first sleep!  Dammit!

I'm pleased to say that X-Rite's little program works just as well for W7 as it did for Vista, so I've installed it in my Startup folder, and I'm using it as before.  But I still yearn for a Microsoft update that corrects the issue once and for all.

Urban Processing: Some Ideas

I think urban processing is cool. The right photo, with the right "gritty" editing, looks modern and eye-catching. I guess it's not to everyone's taste, but I love it.

There are various tutorials and actions available to give your photos an "urban" look, but not every photo responds desirably to these standard methods, and anyway, do you really want your photos to look the same as everyone else's? You'd like your portfolio to be unique and memorable.

I'd like to share two simple methods for you to try. Two methods, but infinite variations - no two photos will ever look the same.

(The trouble with not being a photographer myself is that I don't always have a ready supply of images with which to illustrate tutorials. Therefore, I am indebted to Beth Ritchie, Danielle Mavrick and Kristen Parker for their permission to use the lovely photos herein.)

I made a Facebook group

I'm a hopelessly disorganised person, but I'm trying to streamline my life a little.

From time to time many people have contacted me via email or PM with various questions about Photoshop, and colour management, and calibration, etc.  I always try to respond quickly and thoroughly, but am not always as prompt as I'd like to be.

So I've made a Facebook group:  Ask Damien

Please feel free to join the group, and if you have any little questions, I hope I can help you by answering them.

Question: Do Photoshop's Color Settings matter?

Answer: Not much.

This is a question that comes up quite a lot.  It usually goes something like this:  "My PS Color Settings say sRGB, but my images are coming out in Adobe RGB.  WTF?"

(Actually, not many people say "WTF?"  I just added that for emphasis.)

If you shoot Jpeg, the colour space of your photos is set in your camera.  If you shoot Raw, the space is dictated by your raw processor.  In either case, Photoshop will usually honour that profile, regardless of its own "default" setting.

So, what is Photoshop's "RGB Working Space" useful for then?  Well, only two things, really.  One is when you make a new blank RGB image, it will assume that space by default, unless you specify otherwise in the "New" dialog.  The other is when you open an image without a profile of its own, Photoshop will give it the default profile for as long as it remains open (but it won't save it with that profile, unless you tell it to).

Neither of the above circumstances arise a whole lot.  For most of us, most of the time, we need to concentrate on setting the colour space where it matters - in Raw.

In ACR, you can choose your space in the Workflow Options (at the bottom of the screen).  In Lightroom it's an export option, I believe.

The part of the PS Color Settings dialog that really matters is the "Color Management Policies" section.  Unless you have a very good reason to do otherwise, make sure those are all set to "Preserve Embedded Profiles".

You can find more information about Photoshop's Color Settings in my article here.